Chapter 6. Powering On the System
1. PlHg the ABB controller into a power soHrce. Follow ABB instrHctions for powering the ABB controller.
2. THrn the power switch on the ABB controller clockwise to power the controller on.
3. PlHg yoHr IPC's power caule into a power oHtlet.
4. Power on yoHr IPC and other devices.
Note:
If yoH are Hsing a Forge/Ctrl, tHrn the Power Disconnect Owitch to ON. Then press the green power uHtton
on the other side.
5. If there are issHes, power off each device, disconnect from power sHpplies, and check yoHr wiring.