Card Reader - HP EliteBook 1040 Maintenance And Service Manual

3. Remove the card reader cable (3) from the computer.
To install the card reader cable, reverse this procedure.

Card reader

To remove the card reader, use this procedure and illustration.
Table 5-17 Card reader description and part number
Description
Card reader
NOTE: The card reader spare part kit does not include the card reader cable. The card reader cable
is included in the Cable Kit, spare part number N09040-001.
Before removing the card reader, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the card reader cable (see
Remove the card reader:
1. Remove the three Phillips M2.0 × 2.5 broad head screws (1) that secure the card reader to the
computer.
68 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 40).
Card reader cable on page
38).
67).
Spare part number
N02323-001
38).