Streamium wireless music center&station with wireless streaming (2 pages)
Summary of Contents for Philips WAC5
Page 1
1. Introduction The Firmware Upgrade will upgrade WAC5 & WACS5’s firmware to Version 1.2.10. __________________________________________________________________ 2. Key features added The software release 1.2.10 has provided a solution for CD ejection problem that has happened on a marginal number of CDs.
Page 2
Wi-Fi connection with the Wireless router/Access Point (if applicable): Check the Wireless router/Access Point is working if your Center is connected to PC via a Wireless router/Access Point __________________________________________________________________ 4. Upgrading You can upgrade the embedded firmware in 2 ways Upgrading from CD-ROM Upgrading from PC A) Upgrading from CD-ROM...
Page 3
(Note: Make sure you finalize the CD) ii) Upgrade WACS5 Upgrade WAC5 Center: 1. Check WAC5 Center is on and WAS5 Station is off 2. On Center, insert the upgrading CD into the CD slot loader, with CD graphic printed side facing you...
Page 4
→ Upgrading starts automatically → The display shows “Updating firmware, please wait……” . A progress bar appears → Center will reboot itself twice during the upgrading process → After about 5 minutes, Center returns to HD mode. The upgrading is completed (Note: - Keep your Center turned on during the upgrading.)
Page 5
.zip file. ) ii) Upgrade WACS5 Upgrade WAC5 Center: 1. Connect your PC and WAC5 Center using the supplied Ethernet cable 2. Launch the Digital Media Manager (DMM) on your PC 3. Select Preference → Player Firmware → Upgrade Firmware http://www.winzip.com/...
Page 6
4. Click Yes to start upgrading 5. Find the Firmware Upgrade file you stored in the PC. Click Open...
Page 7
→ You will start transferring the file to WAC5 Center → After file transferring is finished, upgrading starts automatically on WAC5 Center → The Center’s display shows “Updating firmware, please wait……”. A progress bar appears → Center will reboot itself twice during the upgrading process →...
Page 8
Upgrade WAS5 Station: 6. Press STANDBY-ON to turn on WAS5 Station → Upgrading starts automatically → The display shows “Updating firmware, please wait……” . A progress bar appears → Station will reboot itself twice during the upgrading process → After about 5 minutes, Station returns to HD mode. The upgrading is completed (Note: - Keep your Station turned on during the upgrading.) Helpful hints:...
Page 9
6. Firmware history Version 1.2.10 • The software release 1.2.10 has provided a solution for CD ejection problem that has happened on a marginal number of CDs. Version 1.2.0 • Firmware installed on the set delivered...