Transfer to Outside Parameters
These parameters specify how the VPS will transfer calls to trunks from the following services: Custom Service,
Call Transfer Service, and Personal Custom Service.
Outside Transfer Sequence
•
Call Transfer to Outside Sequence
Specifies the sequence the VPS uses to transfer calls to trunks.
•
Call Transfer to Outside Reconnect Sequence on Busy
Specifies the sequence the VPS uses to reconnect the line when the transferred party is busy.
•
Call Transfer to Outside Reconnect Sequence on No Answer
Specifies the sequence the VPS uses to reconnect the line when the transferred party does not answer.
•
EFA Transfer Sequence
Specifies the sequence the VPS uses to transfer calls to trunks using EFA (External Feature Access).
•
EFA Transfer Reconnect Sequence on Busy
Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (External
Feature Access) is busy.
•
EFA Transfer Reconnect Sequence on No Answer
Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (External
Feature Access) does not answer.
•
Call Transfer to Outside Answer Mode
Specifies the answering method the VPS uses to recognise whether the destination party has answered
the transferred trunk call.
•
Ignore Received First DTMF
If the PBX sends a DTMF signal to the VPS when the VPS attempts to transfer a call to an outside
telephone, set this parameter to "Enable".
Document Version 2.1 2008/04
5.2.3 PBX Parameters
Installation Manual
129