Advertisement
Water intake
Press the key to enable the water intake function (Indicator light will light). Put water storage cup
on cup base. Water puri er begins to work, and storage water cup begins to take water. It is a
normal phenomenon that, after rstly using or changing the new lter element, a spot of black water
produced at rst. The suggestion is making 3 glasses of water rst, then, in stand-by condition for
two hours, after making 3 glasses of water, the water puri er can be used normally.
Warm prompt
1. Before taking water, please make sure that the ip lid of water connection is opened, the lid is
closed in place, and that the liquid level sensor in the lid is in the correct position with the cup
body groove;
2. Press the button shortly to turn on and o the water intake function. When the water intake
function is turned on (the indicator light is on), water can be taken automatically take after
putting the cup;
3. In the process of taking water, the machine will stop automatically when the cup is full. Taking
away the cup or press the button shortly will also stop the water;
4. If you use other containers to take water, please press the button for 3 seconds. The water will
be collected for 5 minutes by default. You can press the button shortly to stop the water;
5. Do not block the liquid level sensor in the lid. Do not wash the lid with high temperature water
or place the lid in a high temperature environment;
6. Please wipe the base with a cloth. Do not wash the base directly with water or soak it in water.
3. Cleaning and maintenance
3-1 Trouble shooting
Notes:
The following is the judgment and inspection of common abnormalities. If simple treatment cannot
be eliminated, please send it to the maintenance o ce for consultation. Please do not disassemble
and repair yourself to avoid danger or damage to the water puri er.
The pump may make slight noise when it operates in the purifying and ltering of the water
puri er. You can use it normally.
There is any problem in using, please solve as the following methods. For the fault that can
not be solved, please contact the local sell service center
10
Advertisement
