Philips AZ2000 Owner's Manual page 13

SYNCHRO START CD RECORDING
1. Set the source selector to CD.
2. Insert a CD and if desired, program track numbers.
3. Press STOP•OPEN 9 / to open the cassettte holder.
4. Insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0 to start recording.
™ Playing of the CD program starts automatically from the
beginning of the program. It is not necessary to start the
CD player separately.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording press STOP•OPEN 9 /.
To select and record a particular passage within a track
1. During playback, press and hold down the SEARCH button
∞ or § to find your passage.
2. Press PLAY•PAUSE 2; to put the CD player on pause at the
selected passage.
™ Recording will begin from this exact point in the track
when you press RECORD 0.
RECORDING FROM THE RADIO
1. Set the source selector to AM/FM
2. Tune to the desired radio station using (See RADIO
RECEPTION).
3. Press STOP•OPEN 9 / to open the cassette holder and
insert a blank tape
4. Close the cassette holder.
5. Press RECORD 0 to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9 /.
CASSETTE RECORDER
13