Removing The Covers; Removing The Indoor Unit Covers - Hitachi YUTAKI S80 R410A Series Installation And Operation Manual

7.1

Removing the covers

If it is necessary to access to the indoor unit components, please follow these operations.
7.1.0.1 Removing the indoor unit covers

NOTE
• The pictures shown correspond to the YUTAKI S80 TYPE 1, but the procedure for removing
covers is exactly the same for the TYPE 2 except in case of lateral covers.
• Front cover needs to be removed for any task inside the indoor unit.
• Back cover does not need to be removed.
◆ Removing the indoor unit front cover
1 Unscrew the 2 fixing screws at the lower side.
7
2 Pull the indoor unit front cover forward and then remove it.
68
PMEN0648 rev.0 - 03/2023