Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY rack ............28 Upper basket multipurpose service AND ENVIRONMENT rack ............28 General safety ........4 Upper basket multi-function service Intended use ..........4 rack ............29 Children’s safety ........5 Adjusting the height of the upper Disposing of packaging material ..5 basket ..........
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Transportation of the learn about these collection centers. product Compliance with RoHS If you need to move the Directive product, do it in upright position and hold from The product you have purchased the rear side. Slanting complies with EU RoHS Directive the product onto its (2011/65/EU).
Dishwasher Overview Upper basket Cutlery basket Lower basket Automatic Liquid/Gel Detergent and Rinse Aid Dosing System Type Label Control panel Door Lower impeller Salt reservoir lid 10. Filters 11. Upper impeller 12. Upper basket rail 13. Upper cutlery basket ( depends on model ) 14.
Frequency Band 2.4Ghz Max. Conduction Power : < 100mW CE Declaration of Conformity Arçelik A.Ş. Declares that this appliance complies with Instruction 2014/53/EU. The full text of EU Conformity Declaration is on the web site: Products, address support.beko.com /56 EN...
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Installation Connection to the drain Permitted water temperature: up to 25°C ( 60°C for products Water discharge hose can directly be equipped with Aquasafe+; please connected to the drain hole or sink’s refer toAquasafe+ section ) drainage. The length of this connection The dishwasher may not be connected to must be min.
Installation Aquasafe+ Connection must comply with national • regulations. (depends on model) Power cable plug must be within easy • The Aquasafe+ system protects against reach after installation. water leaks that may occur at the hose inlet.Water contact with the valve box of Unplug the product after the the system must be avoided to prevent washing programme is over.
Installation Initial use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”. To prepare the product to do the • dishes, perform first operation in the shortest programme with detergent while the machine is empty.
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 14
Installation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water is above 90 °dF or if you are using well water, then it is recommended to use water purification devices and special filters. If the hardness level of the supply water is below 13°dF, there is no need to use salt in your dishwasher.
Preparation Detergent Factory settings of the Automatic • Liquid/Gel Detergent Dosing You can use powder, tablet and liquid/gel System are based on the detergent detergent in the machine. amount recommended by detergent Only use the detergents manufacturers. produced particularly for You can proceed to the Settings menu •...
Preparation Adding Liquid/Gel Wipe clean any spilled rinse Detergent and Rinse Aid aid outside the reservoir. Otherwise, it will cause The Automatic Liquid/Gel Detergent Dosing foaming in the next washing system is found on the door of your cycle, reducing the washing dishwasher.
Page 18
Preparation When the detergent warning Use only liquid/gel detergent lamp gives a warning, it will go suitable for the dishwasher. away in a short while after you add liquid/gel detergent. If the Do not mix different brands of warning light is still on after a liquid/gel detergents.
Preparation Installing/Removing the Liquid/ To use powder detergents, Gel Detergent and Rinse Aid Box go to the Settings menu to Top remove the rinse aid and detergent disable the Automatic Liquid/ boxes, push and lift the system cover on Gel Detergent Dosing System both sides as shown with arrows 1 and 2 and if any, the Tablet Detergent and open.
Preparation 2. Use longer programs like Eco or Place the tablet detergent into Intensive. the Tablet Detergent Box found 3. Check quality and storing conditions of on the upper basket of the your detergent dishwasher (A). 4. Check water hardness on your region When using tablet detergents, and make the necessary changes you can use the Tablet...
Page 21
Preparation 4. Make the appropriate rinse aid settings. in the dishwasher. Thus, accumulation of water in deep hollows is prevented. Items not suitable for washing in the dishwasher To prevent possible injuries, Never wash dishes soiled by cigarette always place the sharp and •...
Page 22
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware /56 EN...
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it There are foldable tines (A) located at the will be appropriate to bring the tines in the middle to horizontal lower basket of the machine are designed or vertical position by holding...
Preparation SoftTouch Accessory Tray Wash Supports (depends on model) (depends on model) The SoftTouch Accessory found in the Use the supports to wash trays in the lower basket of your machine enables a bottom basket. safe washing for your fragile glasses. See the Auxiliary functions section for appropriate programme and function selection.
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2.
Preparation Lower basket bottle wire (depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H).
Preparation Upper basket multi- Tray Washing Support (depends on model) function service rack You may use the tray washing supports (depends on model) if you want to wash a tray on your lower Thanks to the upper basket multi-function basket. service rack on the upper basket of your Refer to the Additional Functions section to appliance, you may load and wash long...
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Adjusting the height of the To raise the basket, hold the wires of the basket and pull the basket upwards upper basket with both hands while the basket is at (depends on model) the lowermost position (B) Upper basket height adjustment 2.
Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you In this model, the height setting of the need a larger space for your dishes in the upper basket may be changed using the upper basket of your machine.
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
Operating the product 5 5 5 On / Off Key 8. Function Selection Keys Remote Control function Hygiene Intense function 3. Menu Key SteamGloss Function 4. Time Delay Selection / Menu Direction Selection Keys TrayWash Function 5. Selection / Confirmation Key Fast+ Function 6.
Operating the product Programme selection On/Off Key When you press the On/Off key, the Press the On/Off button to turn on indicator lights illuminate on the display your machine. for ON position. The lights turn off in OFF 2. Check the Salt and Rinse Aid indicators position.
Page 38
Operating the product SteamGloss Function (depends on the model) It provides superior drying performance. TrayWash Function (depends on model) Select Intensive 70°C programme and press function key to run this function. Fast+ Function (depends on the model) It shortens the time of the washing cycle selected and decreases water consumption by enabling washing under higher pressure.
Page 39
Operating the product Functions in Settings Menu EverClean Function Off/On (depends on the model) Under the settings menu of your product, there are some additional functions that depend on the model. To access these functions, press and hold the Menu key for 3 seconds. Press <- and +>...
Page 40
Operating the product Automatic Detergent Dosing Function The Automatic Detergent Dosing function automatically adjusts the liquid/gel detergent use according to the selected washing programme and your settings. To activate or deactivate the function, proceed to “Functions” under the “Settings” menu and follow the instructions regarding the automatic liquid/ gel detergent dosing function.
Operating the product Scheduling the washing Floor illumination Warning to show that machine is time in washing phase Time Delay (depends on the model) If an economical electricity tariff is applied Your machine reflects a light to the floor in your region, you can use the Time during the washing process.
Operating the product To cancel the Time Delay function The machine will remain silent Open the door of the product Press and in pause mode for some time hold the Programme Selection / Programme in order to remove the water Cancel keys for 3 seconds.
Operating the product End of Programme indicator will light up Rinse Aid indicator ( ) when the washing programme is over. Please check the rinse aid indicator on the Open the door of the machine. display to see whether there is adequate 2.
Operating the product is assured, E:01 icon will disappear. If E:01 does not disappear, there is a permanent fault. In this case the authorised service should be contacted. InnerClean (depends on the model) This programme is recommended to be operated on each 1-2 months for machine cleaning and necessary hygiene.
HOMEWHIZ FUNCTION use the WLAN function of your machine. You can check your dishwasher and learn Make sure that your smart device is about its status via your smart device with connected to the internet to use the the HomeWhiz function. application.
Page 46
HOMEWHIZ FUNCTION 7. While the dishwasher is connecting to Follow the steps below to use the selected network, you will see the an already setup dishwasher HomeWhiz icon ( ) flashing. Once the through a new account. connection has been established, the Create a new account and use this said icon will become on permanently.
Page 47
HOMEWHIZ FUNCTION HomeWhiz on/off is on, the wireless connection indicator will Press the remote control key to enable the light permanently; if it is off, the wireless connection indicator will flash at short function. intervals. Once the wireless connection has been turned “On”, your machine will connect to the home network by using the setup settings you made before.
HOMEWHIZ FUNCTION Changing the Downloaded If you download another Program program on the product, your You can use the HomeWhiz application to previous selection will be change the Downloaded Programme, which cancelled. is the last program on the product. You can download as many You can check the Table of Program Data programs as you wish on and Average Consumption Values...
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently. Lower impeller Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove and clean the impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 53
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 54
Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 55
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 56
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.