Note: Unless stated otherwise, all controls are on the front of the CD recorder. When provided on the remote control, you can also use the corresponding buttons, after selecting the CD recorder or separate CD player by pressing CDR or CD. Connections at the back 1 Connection to mains 2 ANALOG IN ...connects to the line output of an...
We have described the most common ways of connecting the CD recorder. If you still have difficulties with the connections you can always contact the Philips Consumer Service desk in your country. INSTALLATION...
INSTALLATION Digital coaxial connections Digital coaxial connection is only required in case you wish to record from a CD player with a digital coaxial output. C D R E C O U T A N A L O U T...
Power supply 1 Plug the power cord supplied into the MAINS connector on the CD recorder, then into a mains socket. 2 Press ON/OFF. The recorder is now in Standby mode. 3 Press any key to activate the recorder. Note: - The CD recorder will automatically adjust to the local mains voltage.