Products must be used, installed and PNC: ______________________________________ operated in accordance with this manual. You may not be able to claim on the Electrolux manufacturer’s warranty in the event that your product fault is due to failure to adhere this manual. CONTENTS...
IMPORTANT SAFETY INSTRUCTIONS • Protect the bottom of the appliance from steam and moisture. TIPS & INFORMATION IMPORTANT Check for any damage or marks • Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall If you find the cooktop is damaged or marked, you must from the appliance when the door or the window is report it within 7 days if you wish to claim for damage/...
Page 4
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) OPERATION WARNING WARNING Risk of damage to the appliance. WARNING WARNING • Do not keep hot cookware on the control panel. Risk of injury, burns or electric shock. • Do not let cookware to boil dry.
INSTALLATION INSTRUCTIONS Built-in appliances TIPS & INFORMATION IMPORTANT • Only use the built-in appliances after you assemble Before the installation, note down the serial the appliance into correct built-in units and work number (Ser. Nr.) from the rating plate. The rating surfaces that align to the standards.
Page 6
INSTALLATION INSTRUCTIONS (CONTINUED) Technical data EHI321BEA EHI321BEA 949163498 Product dimensions (w x d) mm 300 x 520 Cut-out dimensions (w x d) mm 270 x 490 Voltage (volts) 220-240 Cycles (Hz) 50-60 R 5mm Total power 3700 600mm Elements (Watts)
PRODUCT DESCRIPTION EHI321BEA Induction cooking zone 2300 W, with Power function 3200 W Induction cooking zone 1400 W, with Power function 2500 W Control panel Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
Page 8
PRODUCT DESCRIPTION (CONTINUED) Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. The Keep Warm function operates. The Automatic Heat-up function operates. The cookware is incorrect or too small, or there is no cookware on the cooking zone.
OPERATING INSTRUCTIONS Activation and deactivation Automatic heat up Touch for 1 second to activate or deactivate the appliance. Automatic switch off The function deactivates the appliance automatically if: • All cooking zones are deactivated ( • You do not set the heat setting after you activate the appliance.
Page 10
OPERATING INSTRUCTIONS (CONTINUED) Timer Lock Use the Count Down Timer to set how long the cooking When the cooking zones operate, you can lock the control zone operates for one cooking session. Set the Count panel, but not . It prevents an accidental change of the Down Timer after the selection of the cooking zone.
HELPFUL HINTS AND TIPS • Some water boils very quickly on a zone set to the highest heat setting. • A magnet pulls on to the bottom of the cookware. IMPORTANT Use the induction cooking zones with correct TIPS & INFORMATION TIPS &...
CARE AND CLEANING Ceramic Cooktop Cleaning • If the deposit is minimal, simply wipe off with a dry cloth. • If the deposit is more stubborn, clean off with a moist TIPS & INFORMATION IMPORTANT soapy sponge then rinse off.
TROUBLESHOOTING Problem Possible cause and remedy Remedy Red rings, limescale Cooktop surface has not been cleaned Use a ceramic glass cleaner such as Cerapol. or water rings, shiny correctly. Cleaning/ maintenance of the metallic or other cooktop surface is not covered under discolouration, warranty.
Page 14
TROUBLESHOOTING (CONTINUED) Problem Possible cause and remedy Remedy The residual heat The cooking zone is not hot because it If the cooking zone should be hot, speak to the indicator does not operated only for a short time. service centre.
Guarantee Act does not apply. warranty. 11. C onfidentiality: You accept that if you make a warranty claim, Electrolux 7. Exclusions: You may not make a claim under this warranty unless and its agents including ASC may exchange information in relation to you the defect claimed is due to faulty or defective parts or workmanship.