Husqvarna 2-20DT Global Operator's Manual page 20

• The position of the lateral window in the control
cage.
• Different types and hardness of the surface.
To adjust the blast pattern
WARNING:
or touch the cage clamps, feed spout
and blastwheel when the product is on.
Disconnect the power supply when you
adjust the blast pattern.
WARNING:
equipment when you adjust the blastpattern.
Personal protective equipment on
Refer to
page 8 .
1. Disconnect the power plug.
2. Remove the feed spout.
3. Loosen the cage clamps (A).
A
B
20
Do not adjust, loosen
Use personal protective
4. Examine the position of the control cage window.
5. Turn the control cage (B) clockwise, if the hotspot is
too much on the right side.
2037 - 001 - 07.02.2023