Example: Connect
Channels 02 and 10 to
Tree Terminals for
4-Wire Ohms
Measurements
Figure 3-3. Closing Channels 02 and 10 for a 4-Wire Ohms Measurement
Comments
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 3-3
shows how to connect channels 02 and 10 of a single module
switchbox to their respective Tree Switch Terminals and the Analog Bus
connector for 4-wire ohms measurements. Execute:
CLOS (@102,110,190,191)
Opening the AT, BT, and AT2 Tree Switches. Use the
OPEN <
channel_list
>
command to open the tree switches.
For example, to open the AT, BT, and AT2 Tree Switches, execute:
OPEN (@190,191,192)
Measuring with the HP E1326/E1411 Multimeters. The HP E1326/
E1411 Multimeters can directly measure channels of single or multiple
multiplexer modules in a scanning voltmeter configuration. The
multimeters, when correctly programmed, automatically close the
appropriate AT, BT, and AT2 Tree Switches. For more information,
see the HP E1326/E1411 User's Manual.
102 closes channel 02,
110 closes channel 10,
190 closes the AT tree switch,
and 191 closes the BT tree
switch.
Using the Relay Multiplexer Modules
35