Table of Contents
Advertisement
Section 3 - mydlink
1
Device Photo
2
Device Name
3
Device Location
4
Wi-Fi
5
Designated Contact
6
Camera Microphone
7
Motion Setting
8
Point to Go
9
Auto Home
10
Night Vision
11
Anti-Flicker
12
Pan-Tilt Control
Reverse Swipe
13
Direction
MSME Security Kit – Manual (Indoor Camera)
Tap to add a customized photo of this device.
Tap to change the device's name.
Tap to change or add a new location for this device.
Tap to change the wireless network this device will use to connect
to the Internet.
Note: The network must be the same as all your other mydlink
devices that you wish to use the same account for.
Tap here to add, remove, or edit designated contacts that appear in
the rich notification.
Tap to enable or disable picking up sound near your camera in live
view and recordings.
Tap to further configure sensitivity and the active area of motion
detection for the camera.
This photo is what you will see when you control your viewpoint in the
camera's Point to Go live-view. Tap Rescan to scan a new panorama.
Enable to automatically return your camera to the set 'Home Point'
after 60 seconds of inactivity.
Tap to change night vision detection to On, Off or Auto.
Reduces flicker in the video. Tap 50 Hz or 60 Hz depending on the
frequency of your lights.
Choose whether to control your camera's Point to Go live-view pan-
tilt control by swiping or tapping on the panaroma.
Tap to reverse the swipe direction.
17
Advertisement
Table of Contents
