Mitsubishi Electric MELSEC iQ-R Series User Manual page 220

Own station information
The information of the own station on the network is stored.
■ Own station (network card) information (Un\G1252096 to Un\G1252103)
Address
Un\G1252096
Un\G1252097
Un\G1252098
Un\G1252099
Un\G1252100
Un\G1252101 to Un\G1252103
■ Own station (controller) information (Un\G1252104 to Un\G1252121)
Address
Un\G1252104
Un\G1252105
Un\G1252106
Un\G1252107
Un\G1252108
Un\G1252109
Un\G1252110 to Un\G1252119
Un\G1252120 to Un\G1252121
Communication path determination status
■ Communication path determination status (Un\G1260544 to Un\G1260559)
The determination information on the communication path for each network No. of the destination station is stored.
• 0: Path undetermined
• 1: Path determined
Address b15
Un\G1260544 16

Un\G1260558 Empty
Un\G1260559 Empty
The numbers in the table indicate network Nos..
APPX
218
Appendix 1 Buffer Memory (When Using the PLCopen Motion Control FB Mode)
Name
Manufacturer code
Model type
Model code (lower 2 bytes)
Model code (upper 2 bytes)
Version
MAC address
Name
Controller information valid/invalid flag
Manufacturer code
Model type
Model code (lower 2 bytes)
Model code (upper 2 bytes)
Version
Model name string
Vendor-specific device information
b14 b13 b12 b11
15 14 13 12
239 238 237 236
Description
The information of the own station is stored.
(Also used in the CLPA conformance test.)
(Updated even if set as an error invalid station.)
(Updated even if set as a reserved station.)
The own station MAC address is stored.
Un\G1252101: 5th byte, 6th byte of the MAC address
Un\G1252102: 3rd byte, 4th byte of the MAC address
Un\G1252103: 1st byte, 2nd byte of the MAC address
Description
Whether the value stored in the own station (controller) information
is valid or invalid is stored.
• 0: Invalid
• 1: Valid
The information of the own station is stored.
b10 b9 b8 b7
11 10 9 8
235 234 233 232
b6 b5 b4 b3
7 6 5 4
231 230 229 228
b2 b1 b0
3 2 1
227 226 225