Philips 26PW9100D - Hook Up Guide Connecting Manual page 2

2
DVD Player or DVD Recorder to TV
HDMI
Connect DVD player/ Turn on TV and DVD
A B
DVD recorder to the player/DVD recorder.
TV using HDMI cable. Press CH+ or CH- on
remote control to tune
to the video supplied
by HDMI.
Insert a pre-
C
Back of DVD Player/Recorder
recorded DVD into
DVD player/ DVD
recorder and press COMP VIDEO
S-VIDEO VIDEO AUDIO
Y Pb
PLAY to verify
OUT OUT OUT
Pr
correct connection.
OR
Component Video Input
Insert Component Connect red/white
A B
Video connectors into audio cables into the
their corresponding audio output jacks
jacks on both DVD on DVD player/DVD
player/DVD recorder recorder and audio
and TV (sometimes AV inputs on TV.
labeled Y, Pb and Pr).
Turn on TV and DVD Insert a pre-recorded
C D
player/DVD recorder. DVD into DVD player/
Press CH+ or CH- DVD recorder and
on remote control press PLAY to verify
until CVI appears on correct connection.
TV screen.
Note: When using CVI, it is best
not to connect a video signal to
the other AV input on the TV.
Other Possible Connections
S-Video Composite
Refer to panel 3. Audio/Video
Refer to panel 3.
TV
A
HDMI Input
B
R
L
Remote
Control CH+ and CH- Buttons
TV Jack Panel
AV1 in
VIDEO
Y
L/Mono
Pb
AUDIO
R Pr
COMPONENT VIDEO INPUT
TV
A
COMP VIDEO
Y Pb
Pr
Back of DVD Player/Recorder
C
Remote
Control CH+ and CH- Buttons
3
VCR to TV
Connect S-Video
A
cable to S-Video input
on back of TV and
S-Video output on
back of VCR.
Turn on TV and VCR.
C
Press CH+ or CH- on
remote control until
AV1 or AV2 appears
on TV screen.
Note: When you connect S-Video and AV2 at the same time,
you can only hear sound coming from S-Video .
AV2 in
S-VIDEO
B
Connect the video
A
cable (yellow) to the
S-VIDEO VIDEO AUDIO
R
VIDEO AV input on
OUT OUT
OUT
L
back of TV and the
corresponding video
output on back
of VCR.
Turn on the TV and
C
VCR. Press CH+ or
CH- on remote
control until AV1 or
AV2 appears on TV
screen.
S-Video
TV
Connect audio cables
B
(red/white) to audio AV
Back of VCR
inputs on back of TV and
Audio outputs on back
of VCR.
Insert pre-recorded
D
videotape into VCR and
press PLAY to verify
correct connection.
C
Remote
Control
OR
Composite Audio/Video
TV
Connect audio cables
B
(red/white) to audio
Back of VCR
AV inputs on back of
TV and the corre-
sponding audio
outputs (L & R) on
back of VCR.
Insert pre-recorded
D
videotape into VCR
and press PLAY to
C
verify correct con-
nection.
Remote
Control
TV Jack Panel
AV1 in AV2 in
VIDEO
Y
L/Mono
Pb
AUDIO
S-VIDEO
R Pr
COMPONENT VIDEO INPUT
A
B
L R VIDEO S-VIDEO ANT/CABLE
AUDIO OUT OUT OUT
OUT
CH+ and CH- Buttons
CH+ and CH- Buttons
TV Jack Panel
AV1 in AV2 in
VIDEO
Y
L/Mono
Pb
AUDIO
S-VIDEO
R Pr
COMPONENT VIDEO INPUT
A
B
R L VIDEO S-VIDEO
ANT/CABLE
AUDIO OUT
OUT OUT OUT
CH+ and CH- Buttons