Installing the Roller
Assemblies
1. Install the roller assemblies into the steering heads of
the machine, and secure each end with a new hex-head
bolt, a new split washer, and a new washer (Figure 1).
Important: Align the short roller assemblies so
that the short tubes are on the outside and the long
tubes are on the inside (Figure 12). This staggers
the joints between the roller tubes to improve the
contact with the turf.
1
1. Joints
2. Ensure that each roller spins freely without rubbing on
surrounding components.
1
Figure 12
2. Short roller tube
G025386
4