Bosch 06032A2000 Original Instructions Manual page 10

10 | English
only by a qualified specialist using only original re-
placement parts. Damaged power supplies increase the
risk of electric shock.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The glue pen is intended for solvent-free gluing of materials
such as paper, cardboard, cork, wood, leather, textiles,
foam materials, plastic (except PE, PP, PTFE, Styrofoam®
and plasticised PVC), ceramics, porcelain, metal, glass and
stone.
Product Features
The numbering of the product features refers to the diagram
of the glue pen on the graphics page.
(1) Nozzle
(2) Silicone cap
(3) Feed trigger
(4) On/off button
(5) LED indicator
a)
(6) Glue stick
(7) Glue stick compartment
(8) Charging socket
(9) Charging cable
(10) Power supply (Illustration similar)
(11) USB charging connector
(12) Micro-USB connector
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless glue pen
Article number
Heat-up time approx.
Gluing temperature approx.
Glue stick diameter
Glue stick length
Recommended ambient tem-
perature during charging
Permitted ambient tempera-
A)
ture during operation and
during storage
Weight according to
EPTA-Procedure 01:2014
Rechargeable battery
1 609 92A 7US | (27.05.2022)
Cordless glue pen
Rated voltage
Capacity
Number of battery cells
Operating time per battery
charge approx. (according
to Bosch testing procedures)
A) Limited performance at temperatures <0 °C
B) Corresponds to approx. six glue sticks
Power supply
Article number
Output voltage
Output current
Permitted battery tempera-
ture during charging
Charging time
Protection class
Additional technical data can be found at:
http://www.bosch-do-it.com/ecodesign
Assembly
Battery Charging (see figure A)
Use only the power supplies listed in the technical
u
data. Only these power supplies are matched to the lith-
ium-ion battery of your glue pen.
Pay attention to the mains voltage. The voltage of the
u
power source must match the voltage specified on the
rating plate of the power adaptor. Power adaptors
marked with 230 V can also be operated with 220 V.
Note: The battery is supplied partially charged. To ensure
full capacity of the battery, completely charge the battery
before the first use.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The Li-ion battery is protected against deep discharge. A
GluePen
protective circuit switches the glue pen off when the battery
3 603 BA2 0..
is drained, meaning the adhesive is no longer being heated.
If the LED indicator (5) flashes red, the battery has less than
s 15
30 % capacity and should be charged. When the battery is
°C 170
fully charged, the LED indicator is continuously lit red.
mm 7
To charge the battery, connect the Micro-USB
mm 150
connector (12) of the charging cable (9) to the charging
socket (8) and the USB charging connector (11) to the
°C +5 to +40
power supply (10). Then plug the mains plug of the power
supply into the plug socket.
°C −20 to +50
The LED indicator (5) will flash green during the charging
process. When the charging process is complete, the LED in-
dicator will be continuously lit green. Unplug the power sup-
kg 0.14
ply from the mains.
Li-ion
GluePen
V= 3.6
Ah 1.5
1
B)
min 30
2 609 120 7..
V 5.0
A 1.0
°C +5 to +40
h 3−4
/Ⅱ
Bosch Power Tools