Get Started; Charge The Battery - Philips TAT4507 User Manual

3 Get started

Charge the battery

Note
 Before you use your headphones, place them in
the charging case and charge the battery for 2
hours for optimum battery capacity and
lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 Finish your call before charging. Connecting the
earpieces to charge will power them off.
Earpiece
Take out the earpieces and remove the
insulation labels.
Put the earpieces back into the charging
case and close the lid, the earpieces then
start charging.
Tip
 Normally, a full charge takes 2 hours (for the
earpieces or charging case) by USB cable.
Charging case
Plug one end of the USB-C cable into the
charging case and the other end into the
power source.
Tip
 The charging case serves as a portable backup
battery for charging the earpieces. When the
charging case is fully charged, it will fully
recharge the earpieces 3 times.
5 EN