Bosch UniversalBrush 3 603 CE0 000 Original Instructions Manual page 27

Operation
Starting Operation
Switching On/Off
– To switch on the power tool, press the on/off switch (1).
– To switch off the power tool, press the on/off switch (1) again.
Working Advice
The cleaning performance is primarily determined by the choice of cleaning adapter and
the contact pressure.
Only cleaning adapters in perfect condition will deliver good cleaning performance and
protect the power tool.
Be sure to apply consistent contact pressure in order to increase the service life of the
cleaning adapters.
Excessively increasing the contact pressure will not lead to increased cleaning perform-
ance, but to more severe wear of the power tool and of the cleaning adapter.
Use only original Bosch accessories.
u
Cleaning surfaces
– Protect the surroundings of the area to be cleaned from spray using suitable covers.
– Moisten the bristles or the pad with a suitable liquid, gel-like or powdery cleaning
agent.
or
Spray the surface to be cleaned directly with a spray cleaner.
– First position the power tool on the surface to be cleaned and then switch on the
power tool.
This prevents spray.
– Move the power tool slowly, in a circular motion and without exerting pressure on the
surface to be cleaned.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be overloaded. If the power tool is
overloaded or the permitted battery temperature is exceeded, the electronics of the
power tool will switch off until the temperature returns to within the optimum operating
temperature range.
Bosch Power Tools
English | 27
1 609 92A 8CU | (25.04.2023)