Special Functions - Samsung BIXOLON SRP-270 Manual

6-2 Special Functions

The Windows Driver supports the special functions indicated below.
These special functions are available when using the characters after the "FontControl"
font is selected.
This function is not an ordinary character printing function. Take special care.
1) Sample Use
Character
5
6
7
a
b
c
d
e
g
w
x
y
A
B
C
D
E
P
If the "FontControl" font is selected and 6 is entered, the "LF" (Line Feeding) operation is
activated. (does not entail the printing of the character "6)
2) "FontControl" Font Function
Printer font for special
function
FontControl
Rev. 2.03
All manuals and user guides at all-guides.com
Special Function
HT is output
LF is output
CR is output
Open Drawer 2 (50ms drive pulse width)
Open Drawer 2 (100ms drive pulse width)
Open Drawer 2 (150ms drive pulse width)
Open Drawer 2 (200ms drive pulse width)
Open Drawer 2 (250ms drive pulse width)
Cut Receipt (partial cut) without paper feeding
Text is aligned left
Text is centered
Text is aligned right
Open Drawer 1 (50ms drive pulse width)
Open Drawer 1 (100ms drive pulse width)
Open Drawer 1 (150ms drive pulse width)
Open Drawer 1 (200ms drive pulse width)
Open Drawer 1 (250ms drive pulse width)
Cut Receipt (partial cut)
- Open Drawer 1/2
- Cut receipt
- Cut receipt(without paper feeding)
- Justification(Left/Center/Right)
- Output HT,Output LF, Output CR
- 46 -
Function
SRP-270
Note
Size(point/dot)
( 9 / 9x9 )