Installation - Hitachi 6HK1 Workshop Manual

installation

1. Cylinder head cover installation
1. Align the head cover gasket to the cylinder head
cover.
2. Install the cylinder head cover to the lower cover.
tightening torque： 13 N・m { 1.3 kgf・m / 115 lb・in }
Note：
・ Referring to the tightening order in the
diagram, temporarily tighten all bolts and then
completely tighten them.
1. Cylinder head cover
2. Head cover gasket
3. Lower cover
3. Connect the ventilation hose to the air breather.
4. Connect the water pipe bracket to the cylinder head
cover.
Mechanical (6HK1) 1B-3
tightening torque： 20 N・m { 2.0 kgf・m / 14 lb・ft }
1. Ventilation hose
2. Water pipe bracket
3. Clip