Canon imagePRESS Server M10 Service Manual page 38

■ CPU and CPU cooling assembly
The CPU is installed in a socket on the motherboard. Before removing the CPU from its socket, remove the motherboard from
the chassis (see "Removing the motherboard" on page
the cooling assembly from the CPU socket (see
and a heatsink.
NOTE:
Do not remove the CPU fan from the heatsink.
1
2
3
4
5
No.
1 CPU fan
2 Heatsink
3 CPU
4 Load plate
5 CPU socket on motherboard
6 Socket lever
● To remove a CPU
1. Access and open the imagePRESS Server, as described on
26), disconnect the CPU fan cable from the motherboard, and remove
"To remove a CPU" on page
Figure 18: CPU cooling assembly
Name
"Accessing the imagePRESS Server" on page
32
3. REPLACING PARTS
32). The CPU cooling assembly consists of a fan
6
18.