1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
3 Service Navigation 3.1. PCB Layout Board Name Function Board Name Function Power Supply Data Driver (Lower Right) Non serviceable. Data Driver (Lower Left) P-Board should be exchange for service. Scan Drive Main AV input, processing Sustain Drive Remote receiver, Power LED, C.A.T.S sensor Scan out (Upper) Non serviceable.
4 Specifications Power Source AC 220 - 240 V, 50 / 60 Hz (Except P) AC 110 - 240 V, 50 / 60 Hz (P) Power Power Rating 300 W Standby condition 0.4 W Display panel Aspect Ratio 16:9 Visible screen size 117 cm (diagonal) 1,019 mm (W) ×...
Page 9
ETHERNET 10BASE-T / 100BASE-TX Dimensions (W × H × D) 1,126 mm × 737 mm × 324 mm (With Pedestal) 1,126 mm × 703 mm × 93 mm (TV only) Mass 30.5 kg Net (With Pedestal) 26.5 kg Net (TV only) Note •...
5 Service Mode 5.1. How to enter into Service Mode 5.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [i] button of the remote control three times within 2 seconds. 5.1.2.
Page 11
5.1.4. Contents of adjustment mode • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...
5.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.
5.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Hotel Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Initial INPUT Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched press [AV] button of the remote control three times within...
5.5. Data Copy by SD Card 5.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
Page 15
5.5.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
Page 16
5.5.4. Data copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.
6 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 6.1. Check of the IIC bus lines 6.1.1. How to access 6.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
6.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...
7 Service Fixture & Tools 7.1. SC jig Purpose: To find the failure board (SC or SU/SD) when the power LED is blinking 7 times. SC jig: Jumper connector to connect to SC50 connector on SC board Part number: TZSC09187 How to use: Caution: Remove SC jig from SC board after inspection.
8 Disassembly and Assembly Instructions 8.1. Remove the Rear cover 8.4. Remove Side terminal cover 1. See PCB Layout (Section 3) 8.2. Remove the AC inlet 1. Remove the screws (×2 2. Remove the Side terminal cover. Caution: To remove P.C.B. wait 1 minute after power was off for dis- charge from electrolysis capacitors.
8.6. Remove the A-Board 8.8. Remove the SU-Board 1. Remove the Tuner unit. (See section 8.5.) 1. Disconnect the flexible cables (SU1, SU2, SU3 and SU4) connected to the SU-Board. 2. Remove the screws (×2 ) and remove the A-Board. 2.
8.10. Remove the SC-Board 8.12. Remove the Stand bracket and the Hanger metals 1. Remove the SU-Board and SD-Board. (See section 8.8. and 8.9.) 1. Remove the Plasma panel section from the servicing 2. Disconnect the connector (SC2). stand and lay on a flat surface such as a table (covered 3.
8.13. Remove the Radiator plate 8.15. Remove the C2-Board 1. Remove the Hanger metal and the Stand bracket. (See 1. Remove the Stand bracket. (See section 8.12.) section 8.12.) 2. Disconnect the flexible cables (CB8, CB9, CB10, CB11, CB12, CB13, CB14 and CB15). 2.
8.17. Remove the Plasma panel sec- 8.18. Remove the Glass holders tion from the Cabinet assy 1. Remove the Cabinet assy. (See section 8.17.) 2. Remove the screws (×5 1. Remove the Attachment metal (See section 8.16.) and 3. Remove the Glass holder top. remove the Cabinet assy.
9 Measurements and Adjustments 9.1. Adjustment 9.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW. Procedure 1. Go into main item [VSUS] in Service Mode. LOW will be displayed. 2. Press [OK] button to go to TEST stage. White pattern without On-Screen Display will be displayed during TEST and CONF stage.
Page 28
9.1.2. Sub-Contrast adjustment Name of measuring instrument Connection Remarks RF generator Base Band signal generator HD signal generator Steps Remarks Connect IIC cable (bus controller-cable) after banner OSD appear. Note: And after SRQ-L, begin an adjustment 2 seconds later. Sub-contrast adjustment is unadjusted for AV/ HD input.
Page 29
Steps Remarks Another procedure Connect IIC cable (bus controller-cable) after banner OSD appear. And after SRQ-L, begin an adjustment 2 seconds later. Adjustment of HD system 1. At 1080i 100% Full White or Split colour bar receive component signal, as shown below. 2.
Page 30
9.1.3. White balance adjustment The adjusting method is different according to the PEAKS EEPROM version. [copy adjustment] : Peaks EEPROM ver.1.00- [Differential and copy adjustment] : Peaks EEPROM ver.1.**- Name of measuring instrument Connection Remarks W/ B pattern Panel surface Color analyzer (Minolta CA-100 or equivalent) Steps...
Page 31
Steps Remarks [Differential and copy adjustment] Execute adjustment for color temp. [NORMAL], and set data for color temp. [COOL], [WARM] by data shift WB of HD (or PAL) copies the adjustment data from an adjusted format side. Note: The adjustment does only color temp. [NORMAL]. A adjustment value difference from [NORMAL] is written to EEPROM as for [COOL] and [WARM] by operat- ing a [OK] key.
10 Block Diagram 10.1. Main Block Diagram DIGITAL SIGNAL PROCESSOR HDMI1-3 (HDMI2) ETHERNET DATA TMDS DATA ETHERNET LAN CON I/F ETHER PHY HDMI I/F SIF_OUT SIF I/F SD CARD DATA G/S ONLY SD CARD SD CARD I/F SLOT IFD_OUT TUNER TUNER I/F USB 1,2 USB I/F...
10.3. Block (2/4) Diagram DIGITAL SIGNAL PROCESSOR IC9300 PD5L VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA P+3.3V Sub Filed Processor IC9304 P+3.3V P+3.3V SI/SO SOS8_SS IIC0 FLASH I/F FLASH SOS8_SS P_S0 DATA DRIVER CONTROL P_S1 D_UHZ IC5000...
10.4. Block (3/4) Diagram POWER SUPPLY COLD COLD AC CORD Fuse AC Vin PHOTO (Live) Detection COUPLER (Neutral) FILTER STANDBY SS11 VOLTAGE CONVERTER T101 FET SW Vsus P+15V FET SW Relay F15V for prevention of inrush current F15V STB5V Drop IC SOUND15V OCP/OVP P+15V...
11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Wiring (1)
Page 44
Model No. : TH-P46U30G/M/P/S/V Schematic Diagram Note...
Page 45
Model No. : TH-P46U30G/M/P/S/V Replacement Parts List Note...
Page 46
Model No. : TH-P46U30G/M/P/S/V A-Board (1/12)
Page 47
Model No. : TH-P46U30G/M/P/S/V A-Board (2/12)
Page 48
Model No. : TH-P46U30G/M/P/S/V A-Board (3/12)
Page 49
Model No. : TH-P46U30G/M/P/S/V A-Board (4/12)
Page 50
Model No. : TH-P46U30G/M/P/S/V A-Board (5/12)
Page 51
Model No. : TH-P46U30G/M/P/S/V A-Board (6/12) and K-Board...
Page 52
Model No. : TH-P46U30G/M/P/S/V A-Board (7/12)
Page 53
Model No. : TH-P46U30G/M/P/S/V A-Board (8/12) S-10...
Page 54
Model No. : TH-P46U30G/M/P/S/V A-Board (9/12) S-11...
Page 55
Model No. : TH-P46U30G/M/P/S/V A-Board (10/12) S-12...
Page 56
Model No. : TH-P46U30G/M/P/S/V A-Board (11/12) S-13...
Page 57
Model No. : TH-P46U30G/M/P/S/V A-Board (12/12) S-14...
Page 58
Model No. : TH-P46U30G/M/P/S/V C1-Board (1/2) S-15...
Page 59
Model No. : TH-P46U30G/M/P/S/V C1-Board (2/2) S-16...
Page 60
Model No. : TH-P46U30G/M/P/S/V C2-Board (1/2) S-17...
Page 61
Model No. : TH-P46U30G/M/P/S/V C2-Board (2/2) S-18...
Page 62
Model No. : TH-P46U30G/M/P/S/V SC-Board (1/4) S-19...
Page 63
Model No. : TH-P46U30G/M/P/S/V SC-Board (2/4) S-20...
Page 64
Model No. : TH-P46U30G/M/P/S/V SC-Board (3/4) S-21...
Page 65
Model No. : TH-P46U30G/M/P/S/V SC-Board (4/4) S-22...
Page 66
Model No. : TH-P46U30G/M/P/S/V SS-Board (1/2) S-23...
Page 67
Model No. : TH-P46U30G/M/P/S/V SS-Board (2/2) S-24...
Page 68
Model No. : TH-P46U30G/M/P/S/V A-Board (Foil Side) S-25...
Page 69
Model No. : TH-P46U30G/M/P/S/V A-Board (Component Side) S-26...
Page 70
Model No. : TH-P46U30G/M/P/S/V K-Board S-27...
Page 71
Model No. : TH-P46U30G/M/P/S/V C1-Board S-28...
Page 72
Model No. : TH-P46U30G/M/P/S/V C2-Board S-29...
Page 73
Model No. : TH-P46U30G/M/P/S/V SC-Board (Foil Side) S-30...
Page 74
Model No. : TH-P46U30G/M/P/S/V SC-Board (Component Side) S-31...
Page 75
Model No. : TH-P46U30G/M/P/S/V SS-Board S-32...
Page 76
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TZTNP01MFUV A-PRINT COMPLETE 1 (V) (RTL)PAVCTH TZTNP01MLUG A-PRINT COMPLETE 1 (G) (RTL)PAVCTH TZTNP01MUUM A-PRINT COMPLETE 1 (M) (RTL)PAVCTH TZTNP01MVUS A-PRINT COMPLETE 1 (S) (RTL)PAVCTH...
Page 77
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C3045 ECJ1VB1A105K C 1UF, 10V C3046 ECJ1VB1A105K C 1UF, 10V C3047 F1J1A106A043 C 10UF, 10V C3048 ECJ1VB1A105K C 1UF, 10V C3049 ECJ1VB1A105K C 1UF, 10V...
Page 78
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C4921 F1J1E105A231 C 1 UF 25V C4922 F1K1E106A136 C 10UF, 25V C4923 F1K1E106A136 C 10UF, 25V C4924 F1H1H104A970 C 0.1UF, , 50V C4925 F1J1E105A231...
Page 79
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8044 F1G1C104A077 C 0.1UF 16V C8046 F1G1C104A077 C 0.1UF 16V C8047 F1G1C104A077 C 0.1UF 16V C8050 F1G1C104A077 C 0.1UF 16V C8051 F1G1C104A077 C 0.1UF 16V...
Page 80
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8570 F1G1C104A077 C 0.1UF 16V C8603 F1J1A106A043 C 10UF, 10V C8604 F1G1C104A077 C 0.1UF 16V C8605 F1G1C104A077 C 0.1UF 16V C8607 F1G1H100A565 C 10PF 50V...
Page 81
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9337 F1J1A106A043 C 10UF, 10V C9347 F1G1A105A047 C 1UF 10V C9351 F1G1C104A077 C 0.1UF 16V C9352 F1G1A105A047 C 1UF 10V C9362 F1G1C104A077 C 0.1UF 16V...
Page 82
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16315 ECJ1VB1A105K C 1UF, 10V C16316 ECJ1XB1C104K C 0.1UF, Z, 16V C16317 ECJ1VB1A105K C 1UF, 10V C16318 F1J1H104A717 C 0.1UF, 50V C16319 F1J1H104A717 C 0.1UF, 50V...
Page 83
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16834 F1K2J222A014 C 2200PF ,630V C16842 F2A2C1010028 E 100UF, 160V 1 PAVCTH C16843 ECJ1VB1A105K C 1UF, 10V C16844 F1J1H104A717 C 0.1UF, 50V C16854 F1J1H104A717 C 0.1UF, 50V...
Page 84
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks CB10 K1MY55B00002 55P CONNECTOR CB11 K1MY55B00002 55P CONNECTOR CB12 K1MY55B00002 55P CONNECTOR CB13 K1MY55B00002 55P CONNECTOR CB14 K1MY55B00002 55P CONNECTOR CB15 K1MY55B00002 55P CONNECTOR...
Page 85
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D16474 B0ACCJ000048 DIODE D16475 DZ2J051M0L ZENER DIODE D16476 B0ACCJ000048 DIODE D16481 B0FCCN000003 DIODE D16491 B0ACCJ000048 DIODE D16492 DZ2J047M0L ZENER DIODE D16493 B0ADCJ000100 DIODE D16506 DZ2J051M0L...
Page 86
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC3001 C1AB00003385 1 PAVCTH IC3753 C1ZBZ0004368 1 PAVCTH IC4900 C1AB00003457 1 PAVCTH IC5000 AN34044A-VF 1 PAVCTH IC5251 C0CBCBC00227 IC5350 C0DBAYY00931 1 PAVCTH IC5605 C0DBAGF00030...
Page 87
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC16784 MIP3910MSSCF IC16785 C0DBZYY00352 IC16786 MIP3910MSSCF IC16787 C0DBZYY00352 IC16792 C0BBAA000008 LINEAR IC IC16793 C0DBZMC00006 IC16795 C0CBALC00012 IC16921 C1ZBZ0004292 1 PAVCTH IC17102 C0JBAU000088 IC17201 C0JBAU000088...
Page 88
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks L8100 G1C4R7MA0416 INDUCTION COIL L8102 G1C3R3MA0425 INDUCTION COIL L8531 J0JHC0000045 CHIP INDUCTOR L8532 J0JHC0000045 CHIP INDUCTOR L8600 J0JHC0000045 CHIP INDUCTOR L8609 J0JHC0000045 CHIP INDUCTOR...
Page 89
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q16056 B1HFPFA00001 TRANSISTOR Q16101 B1CFRM000015 Q16102 B1CFRM000023 1 PAVCTH Q16141 B1HFPFA00001 TRANSISTOR Q16161 B1HFPFA00001 TRANSISTOR Q16251 B1ABCF000231 TRANSISTOR Q16280 B1ABCE000015 TRANSISTOR Q16402 B1JBDN000004 TRANSISTOR...
Page 90
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R1125 D0GA104JA023 M100KOHM, J.1/16 W R1126 D0GA102JA023 M1KOHM, J.1/16 W R1127 D0GA472JA023 M 4.7KOHM, J,1/16W R1128 D0GA472JA023 M 4.7KOHM, J,1/16W R1129 D0GA472JA023 M 4.7KOHM, J,1/16W...
Page 91
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R3204 D0GA393JA023 M 39KOHM,J,1/16W 1 PAVCTH R3205 D1BB75R0A055 M 75 OHM,J.1/10W R3206 D0GA393JA023 M 39KOHM,J,1/16W 1 PAVCTH R3207 D0GA393JA023 M 39KOHM,J,1/16W 1 PAVCTH R3209 D1BB75R0A055 M 75 OHM,J.1/10W...
Page 92
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R4930 D0GA392JA023 M 3.9KOHM, J,1/16W R4931 D0GA221JA023 M220 OHM, J.1/16 W R4932 D0GA222JA023 M 2.2KOHM, J,1/16W R4933 D0GA222JA023 M 2.2KOHM, J,1/16W R4941 D1BB1403A055 M 140KOHM,J.1/10W...
Page 93
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8381 D1BA75R0A014 M 75 OHM,J.1/16 W R8382 D1BA75R0A014 M 75 OHM,J.1/16 W R8383 D1BA75R0A014 M 75 OHM,J.1/16 W R8384 D1BA75R0A014 M 75 OHM,J.1/16 W...
Page 94
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8709 D0GA560JA023 M 56 OHM, J,1/16W R8710 D0GA560JA023 M 56 OHM, J,1/16W R8755 D0GA104JA023 M100KOHM, J.1/16 W R8756 D0GB390JA065 M 39 OHM,J,1/10W 1 PAVCTH...
Page 95
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R9224 D0GA470JA023 M 47 OHM, J,1/16W R9226 D0GA470JA023 M 47 OHM, J,1/16W R9247 D0GA470JA023 M 47 OHM, J,1/16W R9307 D0GA470JA023 M 47 OHM, J,1/16W...
Page 96
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16183 D0GB473JA065 M 47KOHM J. 1/10W 1 PAVCTH R16191 D1BD2700A044 M 270 OHM,J.1/8 W R16192 D0GB103JA065 M 10K OHM J 1/10W R16193 D0GD750JA052 M 75 OHM,J,1/8W...
Page 97
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16493 D1BD5111A077 M5.11KOHM.J.1/8 W 1 PAVCTH R16494 D1BB2001A055 M 2KOHM,J.1/10W R16497 D0GB473JA065 M 47KOHM J. 1/10W 1 PAVCTH R16498 D0GB103JA065 M 10K OHM J 1/10W...
Page 98
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16634 D0GD222JA052 M 2.2KOHM,J,1/8W 1 PAVCTH R16645 D0GB562JA065 M 5.6KOHM,J,1/10W 1 PAVCTH R16646 D1BD8660A044 M 866 OHM,F.1/8W 1 PAVCTH R16648 D0GF102JA047 M 1.0 KOHM,J,1/3W...
Page 99
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16892 D1BF8252A058 M82.50KOHM, 1/4W R16893 D1BF8252A058 M82.50KOHM, 1/4W R16894 D1BB3091A087 M3.09KOHM,D 1/16W 1 PAVCTH R16895 D1BB9091A087 M9.09 KOHM,J.1/10W 1 PAVCTH R16897 D1BB2262A055 M22.6KOHM F 1/10W...
Page 100
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17202 D0GB101JA065 M 100 OHM,J,1/10W R17203 D0GB101JA065 M 100 OHM,J,1/10W R17204 D0GB101JA065 M 100 OHM,J,1/10W R17205 D0GZ1R0JA020 M 1 OHM, J,1/2W R17207 D0GZ1R0JA020 M 1 OHM, J,1/2W...
Page 101
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks T16471 G4DYA0000253 SWITCHING TRANS 1 PAVCTH T16472 G4DYA0000252 SWITCHING TRANS 1 PAVCTH TU4801 ENGS7302D5F TUNER 1 (G) (S) PAVCTH TU4801 ENGS9301D5RF TUNER 1 (M) (P) (V) PAVCTH...
Page 102
Model No. : TH-P46U30G/M/P/S/V Exploded View 1 S-59...
Page 103
Model No. : TH-P46U30G/M/P/S/V Exploded View 2 S-60...
Page 104
Model No. : TH-P46U30G/M/P/S/V Packing 1 S-61...
Page 105
Model No. : TH-P46U30G/M/P/S/V Packing 2 S-62...
Page 106
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks K2AHYH000042 AC INLET WITH CABLE 1 PAVCTH K2CN3YY00006 AC CORD 1 (G) (V) K2CT3YY00021 AC CORD 1 (M) (S) K2CT3YY00033 AC CORD 1 (P) PAVCTH...
Page 107
Model No. : TH-P46U30G/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TXFKY5Z0092 CABINET ASSY 1 PAVCTH TXJA11MUUM SPEAKER LEAD (A11-SPL/SPR) 1 PAVCTH XSB3+6FJ SCREW(HDMI-SIDE:1) XTB4+12GFJ SCREW(GH:16) XTB4+12GFJK SCREW(BC:8) 8 chap. 3.1.(4) XTV3+10JFJK SCREW(REAR AV:2) 2 chap. 3.1.(5)