Table of Contents
Advertisement
The programme length is
Note:
included in the selected Fertig in (Ready
in) time.
\
Additional programme
settings
You can find possible additional
Note:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
Z Water Plus
(Z Extra Water, Water Plus, Aqua
Plus)
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for further
enhancing the rinsing result.
O Rinse Plus
(à Extra Rinse, Rinse Plus)
Additional rinse cycle. For areas with
very soft water or for further enhancing
the rinsing result.
Additional programme settings
1
Operating the
appliance
Correctly install and connect
Note:
O p e r a t i n g t h e a p p l i a n c e
the washing machine. From
~ Page 26
Before the first wash, run a wash
without any laundry. ~ Page 32
Preparing the washing
machine
Notes
Never switch on a damaged washing
■
machine.
Inform the after-sales service.
■
~ Page 25
Connect the mains plug.
1.
Turn on the tap.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a programme.
Use the programme selector to select
the required programme. Can be
rotated in either direction.
The machine is switched on.
The following appears on the display
panel:
The programme duration,
■
The preset temperature,
■
en
15
Advertisement
Table of Contents
