QUICK START GUIDE
Infinity S 19" Universal Power Shelf
Models: J5964803 L209-L216
Universal Power Shelves accept +24V and –48V rectifiers and converters.
Primary shelf (L209, L211, L213, & L215) includes controller slot. Install shelf immediately below distribution, if used.
Expansion shelf (L210, L212, L214, & L216) includes cables and hardware to connect to an adjacent shelf.
No vertical spacing is required. Provide 2 inch minimum clearance at back of shelf for rectifier airflow.
Refer to Infinity S Flex Power System Brochure for details and accessories.
Tools required
•
Wire cutters and strippers
•
Cable crimpers
•
Torque wrench - 0-65 in-lb (0-10Nm)
Step 1 - Mount Shelf
1.
Reposition mounting ears as required - 4 screws
each.
Torque
to
screwdriver.
2.
Install Inter-Shelf brackets between adjacent
shelves (optional). Torque to 25 in-lb (2.8Nm) - Philli
screwdriver
3.
Attach shelf to the frame using a minimum of four
screws (two on each side) - 12-24 (provided). Torque
to 35 in-lb (4Nm) - 5/16" socket.
Step 2 - Connect Chassis Ground
Lug Landings: #10 double-hole on 5/8-inch center
(lugs not provided)
Some applications may rely on frame mounting
screws for shelf ground omitting the chassis ground
cable.
Minimum 10 AWG wire is recommended.
Torque 10-32 screws to 30 in-lb (3.4Nm) - 5/16"
socket.
Page 1
© 2021 ABB. All rights reserved.
25
in-lb (2.8Nm)
-
Phillips
•
Sockets - 5/16", 7/16", etc.
•
Screwdrivers - Philips #1 and #2, Flat small
2 Adjacent Shelves
Chassis Ground
Mounting Ears
Inter-Shelf Bracket
AC Wiring Box
Knockout