Decommissioning And Disposal; Decommissioning - Siemens 1PH813 Operating Instructions Manual

Decommissioning and disposal

11.1

Decommissioning

Components
Sort the components for recycling according to whether they are:
● Electronics waste (e.g. sensor electronics)
● Iron to be recycled
● Aluminum
● Non-ferrous metal (e.g. motor windings)
● Insulating materials
Process materials and chemicals
Sort the process materials and chemicals for recycling according to whether they are:
● Oil
● Grease
● Solvents
● Cleaner solvent
● Paint residues
Insulating materials
Electrical insulation materials are mainly used in the stator. Some additional components are
made of similar materials and must, therefore, be handled in the same manner. The
insulating materials in question are used on the following items of equipment:
● Various insulators used in terminals boxes
● Voltage and current transformers
● Electric cables
● Instrument wiring
● Surge arrester
● Capacitors
Synchronous/induction motors 1PH813
Operating Instructions, 04/2009, 610.48000.22
Dispose of the spent oil as special waste in accordance with the spent oil ordinance.
Do not mix solvents, cleaner solvents, and paint residues.
11
81