Replacing Flat Hinge; Removing Flat Hinge - Bosch KIV87NFF0/04 Manual

Repair

4.2 Replacing flat hinge

Required tools:
Torx Bit TX20 6,3 mm (1/4")
Warning
Heavy, bulky appliances!
Back and muscle injuries
▶ Appliance door removal operation should only be carried out by
trained specialists.
▶ To move the appliance, two people are required.
▶ Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
▶ Wear protective gloves.
Caution
Open hinge area!
Finger crushing / entrapment
▶ Do not reach into the hinge area.
▶ Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶ Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶ Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Furniture door are removed. See Installation Instruction.
Door is open.
2023-04-18_9001628069

4.2.1 Removing flat hinge

[00340865]
1. Remove four hinge covers.
Copyright by BSH Hausgeräte GmbH
Take care that hinges do not close during removal / installation.
Page 115 of 505