Table of Contents
Advertisement
Installation
3. Futon bed – slacks
a. Make sure that the sensors is supported as firmly as
possible by the slacks
b. If possible – locate it as close to the base(find the best
supported spot)
4. Soft base bed
a. Find the best supported spot in the bed(which is
still close enough to where you sleep)
b. If any issues – try to move the sensor around
NOTE
∙
Position the SLEEPsense so that the power cord faces the external side of the bed.
∙
Ensure that the SLEEPsense is placed on a firm and flat surface. Otherwise, the device
may not work.
∙
When two people each use SLEEPsense, place two devices so that they face each other, as shown
in the image below.
21
Advertisement
Table of Contents
