Chapter 2 Preparations
Installing an extra 2.5-inch HDD cage
Two hard disks can be added by using an extra 2.5-inch HDD cage (2.5-inch Hot Plug Drive Cage Kit).
Install an extra 2.5-inch HDD cage in the server by using the following procedure.
See Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
To remove the side cover and the front bezel, see Chapter 2 (1.3 Removing the Side Cover and 1.4
Removing the Front Bezel).
Remove one screw and the dummy cover from the
3.5-inch expansion bay.
Insert an extra 2.5-inch HDD cage into the 3.5-inch
expansion bay. Do not push the HDD cage to the
end for connecting cables later.
Connect the interface cable that comes with the HDD cage and the power cable on the
motherboard. For details, see Chapter 2 (1.16 Connecting Cables).
Push the HDD cage to the end and secure it with
two screws.
Attach the front bezel and the side cover.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Dummy cover
73