Monitoring Using Your Computer; Video Monitor Using Your Computer - Panasonic KX-THA13 Operating Instructions Manual

Monitoring using your Computer

Video monitor using your
computer
This feature allows you to monitor the view
from the cordless camera using your
computer. The monitored camera does not
ring, allowing you to easily monitor a
baby's room, for example, from different
areas of the house.
You can view the room when:
– you access the cordless camera using
your computer ("Monitoring the room
j Z", page 27).
– the cordless camera notifies your
computer with a pop-up message when
it detects motion and/or sound
("Cordless camera sensor j Z", page
27).
– the cordless camera user notifies your
computer with a pop-up message using
the call button ("Cordless camera call
button j Z", page 29).
Important:
L To use this feature, you must install the
MULTI TALK V Camera Utility software
in your computer. Refer to the
"Installation Guide for MULTI TALK V
Software" for installation details.
L Before monitoring using your computer,
confirm that the base unit is connected
to your computer or computer network
(refer to the "Installation Guide for
MULTI TALK V Software" for more
information).
L For information of the cordless camera
location, see page 9.
26
For assistance, please visit http://www.panasonic.com/phonehelp
L Before you start monitoring, confirm that
the camera lens of the cordless camera
has been adjusted to the correct angle.
L Only 1 person can access the cordless
camera at a time.
L While monitoring the cordless camera
with your computer, you can view the
room, but no sound can be heard.
Accessing the cordless camera
j Z
1
Start up the web browser on your
computer (refer to the "Installation
Guide for MULTI TALK V Software" for
camera utility details).
2
Click the following tabs to display each
page.
1 2 3
1 [Top]: Displays the camera model
number. You can change the language
for the browser temporarily.
2 [Standard Display]: Displays a view of
the room where the cordless camera is
located and the display settings. You
can change the display settings
temporarily.
3 [Simple Display]: Displays only a view
of the room where the cordless camera
is located.
4 [Stored Images]: Displays stored
images that the cordless camera took
at the time of detection.
5 [Setup]: Displays the items of the
cordless camera settings.
4 5 6