Panasonic KX-TDA0484 Getting Started page 35

4.2 Programming the VoIP Gateway Card in the Los Angeles Office
3. Do the following to configure the gateway
entry for the Los Angeles office:
a.
In the GW No. box, type 0.
A gateway entry for the card will be
created with this numbering.
b.
In the Comment box, type Los Angeles
(a unique identifier of the card in the VoIP
network).
c.
In the IP Address box, type
200.45.11.35.
d.
In the Group No. box, type 0.
Note
Having the value 0 for Group No. means
that the card does not belong to any
gateway group. Grouping is useful when
installing multiple cards at one location.
For details, refer to "2.2.6 Address
Translation Table—GW Entry" of the
VoIP Gateway Card Programming
Guide.
e.
Click ENTRY.
4. Do the following to configure the gateway
entry for the Chicago office:
a.
In the GW No. box, type 1.
b.
In the Comment box, type Chicago.
c.
In the IP Address box, type
199.176.64.41.
d.
In the Group No. box, type 0.
e.
Click ENTRY.
f.
Click OK.
5. Confirm your entry, and then click OK.
The gateway entries for the Los Angeles and
Chicago offices are now configured.
Getting Started 35