LG ACHH Series Installation Manual page 7

• Do not install the unit where combustible gas may leak.
- If the gas leaks and accumulates around the unit, an explosion
may result.
• Do not install the product where it is exposed to sea wind (salt
spray) directly.
- It may cause corrosion on the product. Corrosion, particularly on
the condenser and evaporator fins, could cause product
malfunction or inefficient operation.
• When installing the unit in a hospital, communication station, or
similar place, provide sufficient protection against noise.
- The inverter equipment, private power generator, high-frequency
medical equipment, or radio communication equipment may cause
the Product to operate erroneously, or fail to operate. On the other
hand, the Product may affect such equipment by creating noise
that disturbs medical treatment or image broadcasting.
• This equipment is intended for use in industrial environments and
may not provide adequate protection to radio reception in such
environments.
• Use power cables of sufficient current carrying capacity and rating.
- Cables that are too small may leak, generate heat, and cause a fire.
• Do not use the product for special purposes, such as preserving
foods, works of art, etc. It is a consumer Product, not a precision
refrigeration system.
- There is risk of damage or loss of property.
• Keep the unit away from children. The heat exchanger is very sharp.
- It can cause the injury, such as cutting the finger. Also the
damaged fin may result in degradation of capacity.
• The operator must provide protection against water circuit freezing
on all Product units.
- To prevent damage from freezing water.
• Do not install the unit in potentially explosive atmospheres.
Use
• Do not use the Product in special environments.
- Oil, steam, sulfuric smoke, etc. can significantly reduce the
performance of the Product or damage its parts.
• Make the connections securely so that the outside force of the
cable may not be applied to the terminals.
IMPORTANT SAFETY INSTRUCTIONS
7