Installation and operation manual
Illustration
1.
Dry the cleaned assembly with a cotton cloth.
2.
Transport the cleaned and dried assembly unit to the place of installation of the QWIK‑PURE
and mount it.
3.
Put the QWIK‑PURE
Description / explanation
Clean FRC
Carefully wipe clean the sensor tubes of the
following sensors with a damp cloth.
•
•
•
Clean pressure relief chamber
Flush the pressure relief chamber with warm water.
Concluding work
back into operation (see section "8. Commissioning" on page 63).
®
High Level Alarm (HLA) sensor
High Level (HL) sensor
Low Level (LL) sensor
QWIK-PURE
®
®
99 | 124