Q&A - Haier HCP-80 Operating Instructions Manual

Q&A
Fault
The incubator does not
work
The incubator does not
heat
The incubator does not
intake air
Large amount of
condensed water on the
glass door
Any questions during use? Suspect that the incubator has fault? Please check
here fi rst. This chapter provides answers to various possible faults and solutions.
If the problem is still not solved after operation, please call for Haier after-sales
service.
Do not disassemble the incubator by yourself.
The power switch is ON and the cable is plugged in place
Troubleshooting
Are the plug and the socket poorly connected
Is the input power available
Check the settings
Check if the air supply is connected
Check if the pressure relief valve is opened
Check the settings
Check if the outer door is closed
29