Table of Contents
Advertisement
Parts and Their Functions
Rear panel
?
@
A
B
1 AC power socket [ AC IN]
This power socket is for [POWER A].
Connect the power cord (supplied) to this socket.
2 Fuse holder 1 [FUSE F1]
This fuse holder is for [POWER A].
Contains a 125V 10A fuse.
3 AC power socket [~ AC IN]
This power socket is for [POWER B].
Connect the power cord (supplied) to this socket.
4 Fuse holder 1 [FUSE F2]
This fuse holder is for [POWER B].
Contains a 125V 10A fuse.
5 Heat dissipating fan
Fan to keep the internal temperature from rising.
6 RS-422A connectors [REMOTE IN]
RS-422A connectors for controlling each of the
server's channels.
7 Video signal input connector
[VIDEO IN, SDI/SDTI IN]
Video signal input connectors for each of the
server's channels. Used for analog, SDI and SDTI
signals.
During SDI and SDTI input the embedded audio
signals are supplied to these connectors.
8 VIDEO through/buffer output connector
Video signal through (analog)/buffer (SDTI/SDI)
output connectors for each unit channel.
C
5 D
5
ANALOG/DIGITAL
REMOTE IN
VIDEO IN
OUT
SDI/SDTI IN
OUT
VIDEO IN
OUT
SDI/SDTI IN
OUT
VIDEO IN
OUT
SDI/SDTI IN
OUT
VIDEO IN
OUT
SDI/SDTI IN
OUT
E
7
8
9
6
=
: <
C
H
1
C
H
2
C
SIGNAL
H
GND
3
FUSE F2 125V 10A
FUSE F1 125V 10A
C
H
B
A
4
~ AC IN
~ AC IN
3
4
1
2
9 Video output connector [OUT]
Video signal output connectors for each of the
server's channels.
During SDI and SDTI signals output the embedded
audio signals are output from these connectors.
: Analog reference video signal input connector
[REF IN]
The analog reference video signal is input to this
connector.
A stable black-burst signal from an external sync
signal generator is also input to this connector.
; Analog reference video signal through output
connector
< Fibre Channel connector [RAID]
Fibre Channel connector for RAID.
= Fibre Channel connector [HOST]
Fibre Channel connector for HOST.
Connects FC cable in the same package to Fibre
Channel connector for RAID.
> Connector cover
This cover is to avoid connections which are not
necessary for normal operation.
As a shock watcher is attached to the cover to
detect any shocks, the cover should only be
removed for maintenance.
10
;
>
Advertisement
Table of Contents
