A: Fully Automatic Wireless Flash Shooting - Canon 0585C006 Instruction Manual

a: Fully Automatic Wireless Flash Shooting

Autoflash Shooting Using One Receiver Unit
Firing group
This section describes the basic fully
automatic wireless shooting when using
a 430EX III-RT attached to the camera
(sender) and a 430EX III-RT set as a
receiver unit.
Set the sender unit.
1
Set the 430EX III-RT attached to the

camera as the sender unit (p.50).
You can also use a device equipped

with the radio transmission wireless
sender function as the sender unit.
Set the receiver unit.
2
Set the 430EX III-RT to be controlled

wirelessly from the sender as the
receiver unit (p.50).
Set the firing group to A, B, or C (p.59).

The flash will not fire if it is set to D or E.
Check the channel and ID.
3
If the transmission channels and

wireless radio IDs of the sender unit
and receiver unit are different, set
them to the same settings (p.51, 52).
Position the camera and the flash.
4
Position them within the range shown

on page 46.
55