Wiring
(continued)
SIRIUS Connect Vehicle Tuner (SC-C1)
If a device that uses AV-IN, such as a TV tuner (CY-TUN153U, option), is connected to the navigation unit, you
cannot connect a SIRIUS Connect Vehicle Tuner (SC-C1).
You need to use an Expansion module (CY-EM100U, option) to connect both simultaneously.
Data 1
Connector cover
To prevent connector disengagement,
connector
be sure to put on the connector cover.
AV-IN
Battery lead (Yellow)
To the car battery, continuous +12 V DC.
32
Ground lead (Black)
To a clean, bare metallic part of the
car chassis.
32
DATA1
Data 2 connector
DATA2
CN-NVD905U
(Rear)
R (Red)
AUDIO-OUT
L (White)
Clip connector
Clip connector
SIRIUS Connect
Vehicle Tuner (SC-C1)
SIRIUS tuner cable
SC AUDIO cord
(supplied with SC-C1)
Power connector
Cut the lead here, and then insert it together with the
insulation into the clip connector.
Do not use the section from the part
without insulation to the end.
(
page 34)
SC OUTPUT connector