Panasonic WJ-MPU955A User Manual page 56

Alarm Target
An alarm target is an ID number that defines a group of one or more monitors.
Alarm targets are assigned to alarms in order to link alarm actions to specific monitors.
At least one alarm target must be created before you can create an alarm.
When an alarm is triggered, an action will occur. For example, causing a camera spot
(configured in the alarm definition) to display on an array of monitors assigned to a
specific target.
Be careful when assigning monitors across areas to the same target.
This will be important when assigning a target that contains monitors
in a different area than the Alarm Action Tour Sequence.
1. Select the Alarms command from the Component menu, and then select
Target Setup
Configuration
52