Mitsubishi Electric MELSEC-Q00U(J)CPU User Manual page 466

Parameter
Item
No.
Password Setting
Model
Password
Name
Active
Module
Setting
Start XY
Detail
User Connection
*1
No.
*2
System Connection
Regard as Error when
Remote Password
Mismatch Count
Reaches Upper Limit
Upper Limit of
Mismatch
*1 This is a connection used by users for communications using the MC protocol or fixed buffer.
*2 This is a connection used by a system for FTP or MELSOFT (TCP/IP, UDP/IP) communications.
464
Description
- Enter a remote password.
Select a model name of the
module for which the remote
-
password set to the CPU module
is checked.
Set the start address of the
- module for which the remote
password is checked.
Set details of the remote
-
password for the QJ71E71.
- Select user connection No.
Select a valid port of the remote
-
password for system connection.
- Set upper limit of mismatch count.
Set upper limit of remote
-
password mismatch count.
Setting range
Four characters or less (alphanumeric
characters, special symbols)
• Built-in Ethernet port QCPU
• QJ71E71
• QJ71C24/CMO
0000 to 0FE0
H H
-
Connection 1 to Connection 16
• Built-in Ethernet port QCPU
• MELSOFT Transmission Port (TCP/IP)
• MELSOFT Transmission Port (UDP/IP)
• FTP Transmission Port (TCP/IP)
• Direct Connection of MELSOFT
• QJ71E71
• Auto Open UDP Port
• FTP Transmission Port (TCP/IP)
• MELSOFT Application Transmission
Port (TCP/IP)
• MELSOFT Application Transmission
Port (UDP/IP), Dedicated Instruction,
CC-Link IE, NET/10(H) Relay
Transmission Port
• HTTP Port, HTTP Protocol
Set whether to regard it as an error when
the number of mismatches on remote
password reaches the upper limit.
1 to 65535
Default Reference
-
-
-
• Built-in Ethernet
port QCPU:
-
QnUCPU User's
Manual
-
(Communication
via Built-in
Ethernet Port)
• QJ71E71:
Ethernet module
manual
• QJ71C24:
Serial
communication
-
module manual
• QJ71CMO:
Modem
interface module
manual
Unchecked
10