Software Installation And Ssd Download; Eblwin Software Requirements; Eblwin Installation Procedures In A Pc First Time; Net Framework - Panasonic Brooks FireTracker FT1020G3 Operation Manual

Software Installation and SSD Download

19
19.1

EBLWin Software Requirements

To install EBLWin software in your PC, the instructions in this chapter must be followed,
the instructions apply only to software versions ≥ V2.0. This does not cover the optional
installation of EBLWeb for the WebServer or TLON installation. For EBLWeb installation,
please refer to the Web Server II manual MA440 for FT1020G3 / FT128. For TLON
installation refer to TLON Technical / Operation Manual M437.
Required files:
The following files must be copied in your PC:
1. Windows .Net Framework V4.7 or above (if Windows did not install it as part of its
updates), normally it will be available in your PC.
2. USB driver V2.18.28 for EBL512 G3 and EBLSniffer.
3. Sentinel_LDK_Run-time_setup file named HASPUserSetup.exe. If not working,
download the latest sentinel LDK Run-time software (free) from
https://cpl.thalesgroup. com/software-monetization/sentinel-drivers
4. EBLWin V2.10.1 file named EBLWin.msi and setup.exe
5. Australian_EBL512G3_2104.BIN or NewZealand_EBL512G3_2104.BIN
6. Firmware Manager V1.2.3 or V1.3.0
Hardware required
1. EBLWin key 5094
2. USB Type A to USB Type B cable
3. Laptop with Win10 or Win11
The order of prerequisite software and drivers installed before EBLWin is important and
must be followed as explained in this chapter.
19.2

EBLWin Installation Procedures in a PC First Time

19.2.1

.NET Framework

If running on Windows 10 or Windows 11, it may already be installed as part of its system.
To ensure that
.NET is turned on, click on windows start and type the keyword "Windows Features" and
ensure that .NET Framework are turned on as shown below:
:
91
Operation Manual
FT1020G3 Rev 2.10.4