Application Button Setting
1
Select the action from [Action] of each button.
<For Healthcare model>
You can select [<none>], [Dashboard], [Display Switch], [Right Click],
[Cleaning Utility] / [Loupe Utility], [Reference Manual] or [Launch an
Application]. To restore the default setting, click [Restore Default].
When you select [Launch an Application], input the label to [Label]
box, and select a file you wish to execute.
<For Field model>
Depending on the configuration of your model, specific actions are
assigned to application buttons [A1], [A2], and [A3] at the time of pur-
chase.
For example, the Camera, RFID Reader, and Barcode Reader func-
tions are assigned to application buttons [A1], [A2], and [A3], respec-
tively, on models that include these functions.
These actions cannot be changed.
For the remaining application buttons, you can select [<none>],
[Dashboard], [Display Switch], [Right Click], [Cleaning Utility] / [Loupe
Utility], [Reference Manual], or [Launch an Application]. To restore the
default setting, click [Restore Default]. When you select [Launch an
Application], input the label in the [Label] box, and select a file you
wish to execute.
You can also select files with extensions .pdf, .jpeg, .wma, etc.
other than .exe.
When you select a file with extension .exe, you can specify the
parameter into [Program parameter].
To disable the application, select [<none>].
2
Click [OK].
17
<Healthcare model without Barcode
Reader>
<Healthcare model with Barcode
Reader>
<Field model without Camera, RFID
Reader and Barcode Reader>