Philips 5000 Series Manual page 41

How do I clean my appliance and the attachments?
4 Slowly move the trimming head around inside
each nostril, making sure the side of the tip is
held firmly against the skin. This reduces the
tickling effect that can occur.
5 Switch off the appliance and clean the
attachment after use.
Dried nasal mucus can block the cutting element,
preventing the appliance from switching on. If the
cutting element is blocked, clean the attachment
(see 'How do I clean my appliance and the
attachments?').
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.
1 Switch on the appliance.
2 Slowly move the trimming head along the rim
of the ear to remove hairs that stick out beyond
the rim.
3 Carefully insert the trimming head into the
outer ear channel.
Do not insert the trimming head more than
0.5 cm into your ear channel, as this could
damage the eardrum.
4 Slowly turn the trimming head around to
remove all unwanted hairs from your outer ear
channel.
5 Switch off the appliance and clean the
attachment after use.
Clean the appliance and the attachments after
each use for optimal performance.
40
English