LG Studio WashTower SWW 50 3 Series Owner's Manual page 51

en-us_main.book.book Page 51 Monday, January 9, 2023 5:59 PM
9
Dry the drum interior with a soft cloth, and
close the door.
10
Store the washer in an upright position.
11
Remove the inserts from the dispenser. Drain
any water in the compartments and let them
dry.
12
To remove the antifreeze from the washer
after storage, run the Speed Wash cycle using
detergent.
• Do not add laundry to this cycle.
When the Water Inlet Hoses Are Frozen
1
Turn off the washer, and unplug the power
cord.
2
Turn off the faucets connected to the water
inlet hoses.
3
Pour hot water on the frozen faucets to thaw
the water inlet hoses and remove the water
inlet hoses.
4
Immerse the water inlet hoses in hot water to
thaw them.
5
Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets.
• See Connecting the Water Inlet Hoses for
details.
6
Turn on the faucets.
7
Press the Power button to turn on the
washer.
8
Press the Spin button to operate spin only
cycle for draining and spinning.
9
Press the Start/Pause button.
When the Drain Hose is Frozen
1
Pour hot water in the washer drum and close
the door.
2
Wait for 1 - 2 hours.
3
Press the Power button.
4
Press the Spin button to operate spin only
cycle for draining and spinning.
5
Press the Start/Pause button to make sure
the water drains.
MAINTENANCE 51