Table of Contents
Advertisement
Use the automated cleaning programs
Rinsing
It is recommended to use the rinsing program when you have not used your Air
Cooker for a longer time. It flushes the internal system with water.
Easy Clean
The EasyClean function helps to dissolve greasy residuals and deep clean the
cooking chamber. The program takes 20 minutes. If the program has finished, you
only need to wipe the cooking chamber with a wet cloth.
Descaling
Your Air Cooker will remind you with a notification on the display when it is time
to descale the appliance.
Note
• We recommend descaling the appliance when you see the reminder,
otherwise the water system may get clogged. If you want to descale the
device later, you can skip the notification. When you switch on your Air
Cooker for the next time, you will be reminded again.
1. Go to "Tools → Descaling" on the appliance display.
Note
• Make sure the appliance is switched on and the cooking chamber has no
residual liquid. If the appliance is still hot, let it cool down with the lid open
for at least 30 minutes.
2. Pour about 80 ml of the Philips CA6700 descaling liquid in the empty
water tank and put the water tank back to the appliance without adding
additional water.
Note
• Use Philips descaling liquid only. Under no circumstances should you use a
descaling liquid based on sulfuric acid, hydrochloric acid, sulfamic or acetic
acid (vinegar) as this may damage the water system in your appliance and
not dissolve the limescale properly.
3. Press "continue" to start descaling.
Note
• The appliance will now dispense the descaling solution. The dispensed liquid
will be collected on the bottom of the cooking chamber.
4. Wait until you get the next instruction on the display screen. This will take
about 10 minutes.
5. Empty the water tank, rinse it and then refill it with fresh water up to the
MAX indication.
English
35
Advertisement
Table of Contents
