Table of Contents
Related Manuals for LG LAA015FL9B4
Summary of Contents for LG LAA015FL9B4
- Page 1 OWNER’S MANUAL LG LED Screen Please read this manual carefully before operating your set and retain it for future reference. LAA015FL9B3 LAA015FL9B4 LAA015FL9B5 LAA015FL9B6 www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY PRECAUTIONS ....3 - Precautions for the AC Adapter and Power ..4 - Precautions for Moving the Product ......6 - Precautions for Installing the Product ....7 - Precautions for Cleaning the Product ....9 - Precautions for Using the Product.......10 - Precautions for Using the Remote control ..12 - Precautions for Experiencing Image Retention .............13... -
Page 3: Safety Precautions
WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS The Safety Precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. -
Page 4: Precautions For The Ac Adapter And Power
• Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is certified by the national standards. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized service center for a replacement. - Page 5 • If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. - Otherwise, this may cause a fire or electric shock due to damage to the product. • Keep the power cord or AC adapter away from any heating devices. - The cord coating may melt and cause fire or electric shock.
-
Page 6: Precautions For Moving The Product
Precautions for Moving the Product WARNING • Contact the service center before moving the product. - It may cause electric shock and damage the product. • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. - You may be electrocuted or the product can be damaged. -
Page 7: Precautions For Installing The Product
Precautions for Installing the Product WARNING • Contact the service center before installing the product. - It can cause electric shock and damage the product. • Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the product to prevent throwing things on the product screen. - Page 8 CAUTION • Install the product where no Electromagnetic Interference occurs. • If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places such as where there is an abundance of fine dust or oil mist, chemical substances are used, exposed to direct sunlight, the temperature is very high or low, the humidity is very high.
-
Page 9: Precautions For Cleaning The Product
Precautions for Cleaning the Product WARNING • Keep the product clean at all times. - If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. • When you need to clean the inside of the product, you must contact the service center. - Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product. -
Page 10: Precautions For Using The Product
Precautions for Using the Product WARNING • Do not use the product in any environment with excessively high temperatures or humidity. • If you use the product for a long period of time, take a rest from time to time to protect your vision. - Extended viewing could result in impaired vision. - Page 11 • Do not use high voltage electrical goods near the product (e.g., a bug zapper). - This may result in product malfunction if it receives an electrical shock. • If there is a gas leak, do not touch the outlet, and open the windows for ventilation. - Otherwise, the product may cause fire or electric shock.
-
Page 12: Precautions For Using The Remote Control
Precautions for Using the Remote control WARNING • Avoid places with high humidity. - It may cause electrical shock or damage the product. • Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. - It may cause fire and you may be injured. -
Page 13: Precautions For Experiencing Image Retention
Precautions for Experiencing Image Retention • Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. - Use a screen saver when using the monitor for a prolonged period of time. -
Page 14: Assembly And Preparation
SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website http://partner.lge.com and download the latest software for your model. How to use the ferrite core Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. -
Page 15: Parts And Buttons
Parts and Buttons LAA015FL9B3, LAA015FL9B5 The image may be different according to the model. Buttons • : Turns the power on or off. • : Displays the current signal and mode. • : Moves left and right. • : Adjust the up and down. •... - Page 16 LAA015FL9B4, LAA015FL9B6 The image may be different according to the model.
-
Page 17: Storage Method For Panel Protection
Storage Method for Panel Incorrect Method Protection Correct Method Panel Panel If the product is tilted onto the bezel, the bottom of the panel may be damaged. If the product needs to be set upright, hold both Panel sides of the product, and tilt backward carefully. Do not let the panel touch the floor. -
Page 18: Installation Precautions Guide
Installation Precautions Guide Temperature • Make a cooling system for the enclosure so that the operating temperature of the product can be maintained. - Product operating temperature: 0 °C to 40 °C (the recommended room temperature is below 25 °C.) • Install in a location where the warm air from an air conditioner does not directly affect the product. - This will prevent malfunctions such as the screen turning off. - Page 19 Installation Position • Ensure the distance from the ceiling of the installation room to the product is at least 400 mm. - The high temperature air collected at the ceiling will naturally circulate to prevent malfunction. • Ensure the distance from the floor of the installation room to the product is at least 100 mm. - The air from the floor will easily circulate to the ceiling to prevent malfunctions.
-
Page 20: Installation Location
Installation Location Installing on a Recessed Wall • After installation on a recessed wall, a bezel can be installed for interior purposes. A : 100 mm or more B : 25 mm or more C : 60 mm or more When Installing the Bezel •... - Page 21 Installing on a Wall A : 100 mm or more B : 25 mm or more C : 60 mm or more...
-
Page 22: Remote Control
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. - Page 23 Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. (Navigation Buttons) Scrolls through menus or options. Selects menus or options and confirms your input. (BACK) Allows you to move back one step in the user interaction function.
-
Page 24: Making Connections
MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. - Page 25 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a HDMI cable. • If you turn the monitor on when the set is cold, the screen may flicker. This is normal. •...
-
Page 26: Using The Input List
Using the Input List (HOME) → • → → → Daisy Chain Monitors To use multiple products, first connect an external device to the product, connect one end of the supported signal input cable to the connector of the product, and then connect the other end to the connector of the product you wish to connect to. -
Page 27: Troubleshooting
TROUBLESHOOTING No image is displayed. • Is the power cord connected to the product? - Check if the power cord is correctly plugged into the power outlet. • Did you install the driver? - Check if the function is supported by referring to the graphics card user manual. Issues Related to Screen (Video) •... -
Page 28: Product Specifications
PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). Pixel pitch (distance between pixels) 1.5 mm Resolution 640 x 360 - LDM Resolution: 160 x 120 Environmental Conditions... - Page 29 Sleep Mode: ≤ 0.5 W Standby Mode: ≤ 0.5 W Dimensions (Width x Height x 960 mm x 540 mm x 128.5 mm / 19.34 kg Depth) / Weight LAA015FL9B4, LAA015FL9B6 Power Rated Voltage 100-240 V ~ 50/60 Hz 9.0 A / 9.0 A Power Consumption On Mode: 390 W (Max.) Sleep Mode: ≤...
- Page 30 HDMI/ DisplayPort (PC) Support mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 1280 x 720 44.772 59.855 1366 x 768 47.7 1280 x 1024 63.981 60.02 1680 x 1050 65.29 59.954 1920 x 1080 67.5 3840 x 2160...
-
Page 31: Licenses
LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Vision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. - Page 32 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL Temporary noise is normal when powering ON or SERIAL NO. OFF this device.