Related Manuals for Silvercrest SEM 120 A1
Summary of Contents for Silvercrest SEM 120 A1
- Page 1 ELECTRIC CARVING KNIFE SEM 120 A1 ELECTRIC CARVING KNIFE Operation and safety notes IAN 305932...
- Page 2 GB/IE/NI Operation and safety notes Page...
- Page 5 Warnings and symbols used ........Page 6 Introduction ................Page 7 Intended use ..................Page 7 Scope of delivery ................Page 7 Description of parts ................Page 7 Technical data ..................Page 7 Safety advice ................Page 8 Before first use ..............
-
Page 6: Warnings And Symbols Used
Warnings and symbols used The following warnings are used in this user manual: DANGER! This symbol with the signal word “Danger” indicates a hazard with a high level of risk which, if not avoided, will result in serious injury or death. WARNING! This symbol with the signal word “Warning”... - Page 7 ELECTRIC CARVING KNIFE ˜ Introduction We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use.
-
Page 8: Safety Instructions
Safety instructions BEFORE USE, BECOME ACQUAINTED WITH ALL THE PRODUCT’S SAFETY AND OPERATING INSTRUCTIONS! IF YOU GIVE THE PRODUCT TO A THIRD PARTY, ALSO INCLUDE ALL DOCUMENTATION! The warranty becomes void in the event of damages due to a failure to comply with the user manual! No liability is accepted for consequential damage! No liability is accepted for personal or property damage due to improper use or failure to... - Page 9 Disconnect the product from the power supply and contact your retailer if the product is damaged. m WARNING! Risk of injury! Turn off the product and disconnect it from the power supply before cleaning and when the product is not in use.
-
Page 10: Electrical Safety
Handle sharp knives with care! Do not cut on sensitive or hard surfaces to prevent damages. Always use a suitable cutting surface (e.g. cutting board). Always disconnect the product from the power supply when it is not supervised, before assembly, disassembly and cleaning. - Page 11 Do not let the power cord hang over sharp corners and do not bend it. Keep the power cord away from hot surfaces and make sure that no one can trip over it. If the power cord is damaged, it must be ...
- Page 12 Keep your hands away from the blades . They are very sharp and may cause serious injury. Always first unplug the product before changing the blades ˜ Select the right blade type There are 2 blade types available: Blade type Fig.
- Page 13 ˜ Cutting Plug the power plug 5 into an appropriate socket. Hold the product by the housing. Your thumb is on the switch-on lock 4 . Your index finger and your middle finger are on the button Hold the blades 8 on the food. ...
- Page 14 ˜ Disposal The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.
- Page 15 OWIM GmbH & Co. KG Stiftsbergstraße 1 DE-74167 Neckarsulm GERMANY Model-Nr.: HG04158-BS Version: 07/2018 IAN 305932...