Table of Contents
Advertisement
PAN9520 ETU Evaluation Tool
3.10 Current Measurement
Unplug Jumper on X5
To cut the direct power supply to the PAN9520, the Jumper on X5 must be
unplugged. Otherwise a current measurement will not work.
The ETU provides the feature to measure the current of the PAN9520, independent from the
peripheral components.
The following setup can be used for the current measurement:
If a power profiling is needed, the "nRF Power Profiler Kit II" from Nordic can
be used.
User Guide Rev. 1.0
3 PAN9520 ETU
Page 20 of 35
Advertisement
Table of Contents
