Table of Contents
Advertisement
Others
Screen display
Cause
<Operation related>
NO CF CARD!
There is no CF memory card inserted.
(Flashing for 3 sec.)
PROTECT!
Deletion of a protected clip file was
(Flashing for 3 sec.)
attempted.
NO CLIP!
There is no CF memory card inserted, of
(Flashing for 3 sec.)
there is no clip file available.
SET WLAN AD HOC MODE
Use of DHCP server was attempted
OFF!
while in the AD HOC mode.
(Flashing for 3 sec.)
SET DHCP OFF!
Selection of AD HOC mode was at-
(Flashing for 3 sec.)
tempted while using DHCP server.
OVERLAP HTTP!
Port set for HTTP for WEB Browser is
(Flashing for 3 sec.)
already in use.
OVERLAP ASF_HTTP!
Port set for HTTP for Media Player is
(Flashing for 3 sec.)
already in use.
OVERLAP ASF-RTSP!
Set port for RTSP for Streamproducer is
(Flashing for 3 sec)
already in use by another port.
OVERLAP QT-RTSP!
Set port for RTSP for Quick time is
(Flashing for 3 sec)
already in use by another port.
ILLEGAL SETTING!
Set value exceeded setting range.
(Flashing for 3 sec.)
DATA LENGTH 10 or 26
Setting made with other than 10 or 26
(Flashing for 3 sec)
characters.
CHRACTER IS SHORT!!
Set number of characters is 2 or less / 3
(Flashing for 3 sec)
or less.
SET LEAP MODE OFF!!
Attempted to use LEAP while in the
(Flashing for 3 sec)
ADHOC mode.
SAME OLD PASSWORD!!
The new password is the same as the
(Flashing for 3 sec)
old password.
GARBAGE! (Flashing display
Optimization of internal ROM disk
while optimizing)
currently being processed.
IP ADDRESS ERROR!
Failed to acquire IP address when DHCP
(Flashing display until network
is ON.
connection is established)
NO UPDATE FILES!
There is no update data in the CF
(Flashing for 3 sec.)
memory card.
NO UPDATE CARD!
CF memory card is not inserted.
(Flashing for 3 sec.)
UPDATE FAILED!
Update was not successful.
COPY GUARD!
Signal of recording origin is protected with
copy guard.
Memo
If the input signal is switched during transmission or CF recording, the video may flicker. However, the video will return to normal
after a certain time. (The time will differ depending on the selected encoding parameter.)
Troubleshooting
Reference
Remedy
page
Insert a CF memory card.
4
To delete the clip file, remove the
42
protection.
Check the CF memory card.
––
Set DHCP in the NETWORK SET menu
12
screen to OFF when using the AD HOC
mode.
Set WLAN AD MOC MODE in the
12
NETWORK SET menu screen to OFF
when using DHCP server.
Set an unused port.
13, 52
Set an unused port.
13, 52
Set an unused port.
13, 52
Set an unused port.
13, 52
Set a value within the setting range.
12
Set using 10 or 26 characters.
13
Set using 3 or more / 4 or more charac-
14
ters.
Set LEAP to OFF when in the ADHOC
14
mode.
Set a password different from the old
14
password.
Please wait until process is completed.
––
Set DHCP again.
12
Insert a CF memory card with UPDATE
64
data into the slot.
Insert a CF memory card with UPDATE
64
data into the slot.
Contact your JVC dealer.
64
Input recording signal with no copy guard
––
protection.
66
Others
By using the PING command standard to Windows, it is possible to check whether the connection is correct and that communication
can be made from the PC to SA-DV6000.
1.
Launch the command prompt.
●
For Windows 2000
From the Start button, select [Programs] → [Accessories] → [Command Prompt].
2.
Input the following and press the Enter key.
PING xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx is the IP address of the other party)
Input example: When the IP address of the other party is "192.168.0.10"
PING 192.168.0.010
3.
Check to see that the other party is successfully displayed.
If connection is not successful, "Request timed out" or "Destination host unreachable" message will appear.
Checking communication/connection
67
Advertisement
Table of Contents
