Panasonic DBS Series Programming Manual page 76

Panasonic Digital Business System - Programming Manual
April 1997
Dedicated line to extension
[CONF]#:
(001-144)#:
Each extension can have an exclusive dedicated line. An incoming call from an exchange line set
for private use rings on the extension to which that line belongs only. While there can be a number
of dedicated lines belonging to one telephone, a single dedicated line cannot belong to a number
of telephones. Once set, other extensions can not make calls to or receive calls from that
exchange line port.
Note: Before you assign a line as a dedicated line to an extension, remove it from all Line
Groups.
Auto pause for PBX working
0#: No Auto pause
1#: Auto pause used
When piggy backing a pause may to be set for each PBX line if required by the host.
.
Related step FF2-1#-(01-48)#-10# , Piggy backing to PBX
FF1-3#-15# , REDIAL/PBX auto pause time
DTMF Signalling Specification
0#: 125 ms ON/125ms OFF
1#: 250 ms ON/250ms OFF
This step allows the duration of DTMF tone sent from the system to be lengthened. This may be
required if dial up services requiring further user commands have difficulty detecting the DTMF
tones dialled from the system.
Choice of incoming ringing signal
0#: Incoming ring tone synchronised
1#: 0.375 sec ON/0.25 sec OFF/0.375 sec ON/2 sec OFF
2#: 1 sec ON/2 sec OFF
3#: 0.25 sec ON/0.25 sec OFF/0.25 sec ON/0.25 sec OFF/0.25 sec ON/4.75 sec OFF
The ring tone cadence for incoming calls can be selected for each trunk port. If exchange lines are
assigned for use by individuals, they will know who the call is for by the ring tone pattern.
FF2-1#-(01-48)#-11#-(001-144)#
No dedicated line to extension
Dedicated line for set extension port number
FF2-1#-(01-48)#-12#-(0 or 1)#
FF2-1#-(01-48)#-13#-(0-1)#
FF2-1#-(01-48)#-14#-(0-3)#
[PRIVATE PORT#]
[AUTO PAUSE]
[TONE SEND TIME]
[INCOME TONE PTN]
76
Issue 15
2.x
2.x
2.x
2.x