Frequently Asked Questions - Philips 1000 Series User Manual

8 Frequently
asked
questions
My Bluetooth headphones do not turn on.
The battery level is low. Charge the
headphones.
I cannot pair my Bluetooth headphones
with my Bluetooth device.
The Bluetooth is disabled. Enable the
Bluetooth feature on your Bluetooth
device and turn on the Bluetooth device
before you turn on the headphones.
How to reset pairing.
Let headphone stay in pairing mode
(white and blue light �ashes alternately),
press and hold "Volume +" and "Volume-"
button together more than four seconds
until blue LED light on.
I hear but cannot control music on my
Bluetooth device (e.g. play/pause/skip
forward/backward).
Make sure the Bluetooth audio source
supports AVRCP (see 'Technical data' on
page 8).
The volume level of the headphones is too
low.
Some Bluetooth devices cannot link the
volume level with the headphones through
volume sync. In this case, you have to
adjust the volume on your Bluetooth
device independently to achieve an
appropriate volume level.
12 EN
The Bluetooth device cannot �nd the
headphones.
• The headphones may be connected to
a previously paired device. Turn off the
connected device or move it out of
range.
• Pairing may have been reset or the
headphones have been previously
paired with another device. Pair the
headphones with the Bluetooth
device again as described in the user
manual. (see 'Pair the headphones
with your Bluetooth device' on page
5).
My Bluetooth headphones are connected
to a Bluetooth stereo enabled mobile
phone, but music only plays on the
mobile phone speaker.
Refer to the user manual of your mobile
phone. Select to listen to music through
the headphones.
The audio quality is poor and crackling
noise can be heard.
• The Bluetooth device is out of range.
Reduce the distance between your
headphones and Bluetooth device,
or remove obstacles between them.
• Charge your headphones.
Model, Serial number and Safety
information.
Carefully take off the cushion from
both the left and the right ear cups
L R
The model and safety information are
printed on the speaker covers of both sides
For further support, visit www.philips.com/support.
A few additional information and the serial
number of the device are also available under the
extension arm. Pull down the extension arm of
the headphones
You can now view the additional information
underneath